Lumina V6-3.1L VIN J (2000)
1. Position the door bottom auxiliary weatherstrip to the rear door.
2. Stretch the door bottom auxiliary weatherstrip in order to align the push-in retainers to the holes in the door.
3. Install the push-in retainers to the door bottom auxiliary weatherstrip.
4. Close the door.
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Loosen the quarter trim panels. Refer toRear Quarter Upper Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Rear Quarter Upper Trim Panel Replacement) in Interior Trim.
2. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Center Pillar Upper Trim Panel Replacement) in Interior Trim.
3. Remove the carpet retainer. Refer to Center Pillar Lower Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Center Pillar Lower Trim Panel Replacement) in Interior Trim
4. Grasp the weatherstrip (1).
5. Pull the weatherstrip (1) off the flange on the body (4).
Installation Procedure