Lumina V6-3.1L VIN J (2000)
Trunk / Liftgate Lock Cylinder: Service and Repair
Rear Compartment Lid Lock Cylinder Replacement
Removal Procedure
1. Remove the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement () .
2. Drill out the rivet (3).
3. Remove the rear compartment lock cylinder (2).
4. Remove the gasket (1).
Installation Procedure
1. Install the rear compartment lock cylinder (2) and the gasket (1) to the rear compartment lid. Ensure that the rear compartment lid lock cylinder
shaft engages with the rear compartment lid lock.
2. Install the rivet (3).
3. Install the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement () .