Lumina V6-3.1L VIN J (2000)
Front Subframe: Service and Repair
Frame Removal
Tools Required
J 39580 Universal Engine Support Table
Removal Procedure
1. Install the engine support fixture. Refer to Engine Support Fixture.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) in General
Information.
3. Remove the front tires and wheels. Refer to Tire and Wheel Removal and Installation.
4. Disconnect the power steering cooler pipe from the frame. Refer to Power Steering Cooler Pipe/Hose Replacement.
5. Secure the power steering cooler.
6. Remove the power steering gear mounting bolts. Refer to Steering Gear Replacement.
7. Secure the power steering gear.
8. Remove the engine mount-to-frame nuts. Refer to Engine Mount Replacement.
9. Remove the transaxle mount-to-frame nuts. Refer to Transmission Mount Replacement.
10. Disconnect both front wheel speed sensor connectors (1).
11. Remove both front wheel speed harness retainers (2) from the frame and the lower control arms.
12. Separate both of the lower ball joints from the lower control arms. Refer to Lower Control Arm Ball Joint Replacement.
13. Lower the vehicle until the frame contacts the J 39580 .
