Lumina V6-3.1L VIN J (2000)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement.
2. Remove the screws from the air inlet grille.
3. Remove the air inlet grille.
Installation Procedure
1. Position the right-side inlet grille by aligning the clearance hole to the wiper arm spindle and connecting pin to the right-side inlet grille.
2. Position the left side inlet grille by aligning the clearance hole to wiper arm spindle and connecting pin to the passenger-side inlet grille.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws to the air inlet grille.
Tighten the air inlet grille screws to 1.5 N.m (13 lb in).
4. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement.