Lumina V6-3.1L VIN J (2000)
1. Align the front door opening weatherstrip (1) to the body flange with the ends joined at the middle of the door sill.
2. Starting at the top of the front pillar, push the front door opening weatherstrip onto the pinch-weld flange.
3. Install the center pillar upper trim.
4. Install the quarter trim panel, as needed.
5. Install the carpet retainers.
6. Install the windshield upper garnish molding.
Auxiliary Weatherstrip Replacement
Auxiliary Weatherstrip Replacement
Removal Procedure
1. Open the front door.
2. Carefully pull the center pillar weatherstrip (1) away from the center pillar.
Installation Procedure