Lumina V6-3.1L VIN J (2000)
Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Weatherstrip
Rear Side Door Window Weatherstrip Replacement
Removal Procedure
1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair
2. Remove the energy absorber pad. Refer to Energy Absorber Pad Replacement.
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair) .
4. Remove the inner belt sealing strip. Refer to Inner Belt Sealing Strip Replacement (Front Door) (See: Front Door Window Glass
Weatherstrip/Service and Repair/Door Window Sealing Strip/Front Side Door Window Belt Inner Sealing Strip Replacement)Inner Belt Sealing
Strip Replacement (Rear Door) (See: ) .
5. Remove the window. Refer to Rear Side Door Window Replacement (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Window
Glass/Service and Repair) .
6. Remove the outer belt sealing strip. Refer to Outer Belt Sealing Strip Replacement (Front Door) (See: Front Door Window Glass
Weatherstrip/Service and Repair/Door Window Sealing Strip/Front Side Door Window Belt Outer Sealing Strip Replacement)Outer Belt Sealing
Strip Replacement (Rear Door) (See: Door Window Sealing Strip/Rear Door Window Belt Outer Sealing Strip Replacement) .
7. Remove the rear door window weatherstrip screw (2).
8. Remove the rear door window weatherstrip (1) from the door.
Installation Procedure
1. Position the rear door window weatherstrip (1) to the door.