Lumina V6-3.1L VIN J (2000)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
Removal Procedure
-
Tools Required
-
J 36721 Front Caliper Bracket Torx Bit
1. Remove the caliper. Refer to Brake Caliper Replacement - Front
2. Remove the caliper mounting bracket bolts (1) using the J 36721.
3. Remove the caliper mounting bracket.
4. Remove the bushings (2) from the mounting bracket.
5. Inspect the bracket (1) for cracks. Replace the bracket if necessary.
Installation Procedure
Caution: These fasteners MUST be replaced with new fasteners anytime they become loose or are removed. Failure to replace these fasteners after
they become loose or are removed may cause loss of vehicle control and personal injury.
