Lumina V6-3.1L VIN J (2000)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (Front)
The content of this article/image reflects the changes identified in TSB 05-05-25-006.
Bulletin No.: 05-05-25-006
Date: September 16, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Front Wheel Speed Sensor Replacement Procedure
Models:
1997-1999 Chevrolet Monte Carlo
1997-2001 Chevrolet Lumina
Wheel Speed Sensor Replacement
Removal Procedure
Important: The front sensor is serviceable only as an assembly. DO NOT attempt to service the sensor harness pigtail as it is part of the
sensor.
1. Raise and support the vehicle.
2. Disconnect the front electrical connector.
3. Remove the bolt retaining the sensor pigtail wire.
4. Remove the 2 bolts retaining sensor to the steering knuckle.
5. Remove the sensor.
Installation Procedure