Lumina V6-3.1L VIN J (2000)
1. Install the heater inlet hose and/or outlet hose.
2. Connect the heater inlet hose and/or the outlet hose to the heater core.
IMPORTANT: Position heater core hose clamps in the indicated location.
3. Use J 38185 in order to secure the heater core hose inlet and/or outlet clamp.
4. Connect the heater inlet hose and/or the outlet hose to the inlet and/or outlet pipe.
5. Use J 38185 in order to secure the heater hose inlet and/or outlet clamp.
6. Refill the cooling system. Refer to Draining and Filling Cooing System in Cooling System.
