Lumina V6-3.1L VIN J (2000)
10.
Install the J 24086-107 adapter onto the piston pin, and install the J 24086-88A through the J 24086-10 and onto the J 24086-107.
Important:
The piston and pin are a matched set and are not to be serviced separately.
11.
Press the piston pin from the piston and connecting rod assembly.
Piston and Connecting Rod Assemble
1.
Install the J 24086-310 fork insert into the J 24086-10 fixture support assembly.
2.
Adjust the J 24086-9 installation pin to the following setting:
3.1 liter engine: G-7.
Caution:
Avoid contact with HOT components. Wear safety glasses and protective heat gloves to avoid personal injury!
Notice: