Lumina V6-3.1L VIN J (2000)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the vertical bolt through the right engine mount strut bracket to the cylinder head.
Tighten the engine mount strut bracket bolt to 50 Nm (37 ft. lbs.).
3. Install the air conditioning compressor. Refer to Compressor Replacement in Heating and Air Conditioning.
4. Install the air conditioning compressor mounting bolts. Refer to Compressor Replacement in Heating and Air Conditioning.
5. Install the right engine mount strut to the right engine mount strut bracket. Refer to Engine Mount Bracket Replacement.
6. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
