Lumina V6-3.1L VIN J (2000)
1. Install the upper and/or lower oil cooler outlet hose(s) to the oil cooler pipe.
2. Install the oil cooler outlet hoses and pipe.
3. Connect the lower oil cooler outlet hose to the oil cooler.
4. Lower the vehicle.
5. Connect the upper oil cooler outlet hose to the thermostat bypass pipe.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the oil cooler pipe bracket bolt through the oil cooler pipe bracket into the right engine mount strut bracket.
Tighten the oil cooler pipe bracket bolt to 10 Nm (89 inch lbs.).
7. Fill the cooling system with engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
8. Add engine oil as necessary. Refer to Engine Oil and Oil Filter Replacement.
9. Inspect the oil cooler for leaks.
