Lumina V6-3.1L VIN J (2000)
Exhaust Pipe/Muffler Hanger: Service and Repair
Pipe Rear Hanger Bracket Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
Notice: Refer to Catalytic Converter Movement Notice in Service Precautions.
2. Suitably support the exhaust system.
3. Remove the exhaust pipe rear hanger insulator from the exhaust pipe rear hanger bracket.
4. Remove the exhaust pipe rear hanger bolt from the rear axle assembly.
5. Remove the exhaust pipe rear hanger bracket.
Installation Procedure
1. Install the exhaust pipe rear hanger bracket to the rear axle assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust pipe rear hanger bolt.
Tighten the exhaust pipe rear hanger bolt to 25 Nm (18 ft. lbs.).
3. Install the exhaust pipe rear hanger insulator to the exhaust pipe rear hanger bracket.
4. Inspect the exhaust system for leaks and underbody contact.
5. Lower the vehicle.
