Lumina V6-3.1L VIN J (2000)
Glove Box Lamp: Service and Repair
IP Compartment Lamp Replacement (Switch)
REMOVAL PROCEDURE
1. Remove the RH instrument panel (IP) insulator.
2. Disconnect the electrical connector from the IP compartment lamp switch (1).
3. Open the P compartment door for additional access around the switch.
IMPORTANT: Use care to protect the wiring harness when removing the IP compartment lamp switch bracket retaining screw.
4. Carefully remove the screw retaining the IP compartment lamp switch bracket to the IP.
5. Carefully remove the switch bracket (with switch) from the P.
6. Depress the switch retaining tabs to release, then remove the switch from the switch bracket.
INSTALLATION PROCEDURE
1. Align and press the IP compartment lamp switch to the IP compartment lamp switch bracket to secure.
2. Carefully install the switch bracket (with switch) into position on the IP.
IMPORTANT: Use care to protect the wiring harness when installing the IP compartment lamp switch bracket retaining screw.
3. Carefully install the IP compartment lamp switch bracket to IP retaining screw.
4. Close the IP compartment door.
5. Connect the electrical connector to the IP compartment lamp switch (1).
6. Install the RH instrument panel (IP) insulator.