Lumina V6-3.1L VIN J (2000)
Transmission Position Switch/Sensor: Service and Repair
Removal Procedure
1. Apply the parking brake.
2. Block the wheels.
3. Place the vehicle is the Neutral position.
4. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
5. Remove the automatic transaxle range selector cable.
6. Remove the wiring harness connectors.
7. Remove the automatic transaxle range selector lever. Refer to Automatic Transmission Range Selector Cable Lever Replacement.
8. Remove the PNP switch mounting bolts.
9. Remove the PNP switch.
Installation Procedure