Lumina V6-3.1L VIN J (2000)
14. To use the stud mount method, remove the original mounting nuts.
15. Use the J 39401-1 mounting nuts in order to secure the module to the fixture.
16. To use the flange mount method, use four of the J 39401-13 hold-down nuts whenever possible in order to secure the module to the fixture.
17. If clearance restrictions do not allow the use of the J 39401-13 hold-down nuts, four M6 x 1.0 nuts with washers may be used.
18. Extend the SIR deployment harness and adapter to full length from the module.
19. Place a 12 V minimum/2 A minimum power source (i.e., vehicle battery) near the shorted end of the harness.
