Lumina V6-3.1L VIN J (2000)
7. Install the automatic transaxle range selector cable.
Important: Verify that the engine starts only in the Park position or the Neutral position once the PNP switch is installed. Readjust the PNP switch
and/or check the shifter and the automatic transaxle range selector cable if the engine starts in any other position. Refer to PNP Switch Adjustment.
8. Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
9. Remove the blocks from the wheels.
10. Disengage the parking brake.
