Lumina V6-3.1L VIN J (2000)
Shift Indicator: Service and Repair
Removal Procedure
1. Remove the steering column. Refer to Steering Column Replacement.
2. Pull out the shifter indicator cable clip from the square hole in the steering column at the top.
Installation Procedure
Important: Ensure the cable is NOT pinched during the installation procedure.
1. Route the shift indicator cable down from the instrument cluster.
2. Route the shift indicator cable underneath the shifter cable and along the side of the column.
3. Slide the shift indicator cable through the slot.
4. Push the connector into the T-adjuster.