Lumina V6-3.1L VIN J (2000)
Shift Cable: Service and Repair
A/T Range Selector Cable Bracket Replacement
Removal Procedure
1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.
3. Remove the automatic transaxle range selector cable from the automatic transaxle range selector cable bracket.
4. Remove the automatic transaxle range selector cable bracket bolts.
5. Remove the automatic transaxle range selector cable bracket.
Installation Procedure
1. Install the automatic transaxle range selector cable bracket.
Notice: Refer to Fastener Notice in Service Precautions.