Lumina V6-3.1L VIN J (2000)
Power Window Motor: Service and Repair
Door Window Regulator Motor Replacement
Door Window Regulator Motor Replacement
Removal Procedure
1. Remove the window regulator. Refer to Front Side Door Window Regulator Replacement (See: Window Regulator/Front Door Window
Regulator/Service and Repair) or Rear Side Door Window Regulator Replacement (Power) (See: Window Regulator/Rear Door Window
Regulator/Service and Repair/Rear Door Window Regulator - Power)Rear Side Door Window Regulator Replacement (Manual) (See: Window
Regulator/Rear Door Window Regulator/Service and Repair/Rear Door Window Regulator - Manual) .
2. Remove the window regulator motor bolts.
3. Remove the window regulator motor from regulator.
Installation Procedure
Important: The window regulator motor may be installed with the regulator in any position.
1. Install the window regulator motor to the regulator.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the window regulator motor bolts.
Tighten the window regulator motor bolts to 10 N.m (89 lb in).
3. Install the window regulator. Refer to Front Side Door Window Regulator Replacement (See: Window Regulator/Front Door Window
Regulator/Service and Repair) or Rear Side Door Window Regulator Replacement (Power) (See: Window Regulator/Rear Door Window
Regulator/Service and Repair/Rear Door Window Regulator - Power)Rear Side Door Window Regulator Replacement (Manual) (See: Window
Regulator/Rear Door Window Regulator/Service and Repair/Rear Door Window Regulator - Manual) .