Lumina V6-3.1L VIN J (2000)
3. Align the holes in the door inner panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the door window regulator bolts (2).
Tighten the bolts to 10 N.m (89 lb in).
5. Install the upper left rivet.
6. Install the lower right rivet.
7. Install the door window regulator cam bolt.
Tighten the nut to 10 N.m (89 lb in).
8. Connect the electrical connector, if equipped.
9. Install the window. Refer to Front Side Door Window Replacement (See: Window Glass/Front Door Window Glass/Service and Repair) .
10. Install the water deflector. Refer to Front Side Door Water Deflector Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
11. Install the trim panel. Refer to Front Side Door Trim Panel Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front
Door Panel/Service and Repair