Lumina V6-3.1L VIN J (2000)
4. Install the cover on the nut.
5. Lift the wiper arm up onto the park ramp.
IMPORTANT: Lubricate the hose with windshield washer solvent to ease installation onto the nozzle.
6. Connect the hose onto the nozzle.
INSPECTION PROCEDURE
^
Inspect the park position. Both wiper arm assemblies must be snug against park ramps.
^
Inspect the wipe pattern. The dimension should be 55-132 mm (2.17-5.20 in) from the tip of the driver's side wiper blade on the outerwipe to the
edge of the glass.
^
The correct park position and outerwipe dimension are determined with the wipers operating at low speed on wet glass.
