Lumina V6-3.8L VIN K (1998)
2. Install the caliper (3) over the rotor (1) and the caliper mounting bracket (2). Ensure that the bushings are in place.
3. Lubricate the caliper slide pin bolts (1). Use silicone grease. Do not lubricate the threads.
4. Lubricate the two rubber bushings (1) in the caliper mounting bracket. Use silicone grease.
NOTICE: Refer to Fastener Notice in Cautions and Notices.
5. Install the caliper slide pin bolts (1). Use a screwdriver in order to push the pin boot over the shoulder of the pin bolt. Ensure that the pin boot
fits securely in the groove of the pin bolt.
^
Tighten the slide pin bolts to 108 Nm (80 ft. lbs.).
