Lumina V6-3.8L VIN K (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Filling
FILLING THE MASTER CYLINDER RESERVOIR
CAUTION: Overfilling the reservoir must be avoided due to the potential for overflow onto the nearby catalytic converters in the exhaust
system. Brake fluid is flammable, and contact with hot exhaust components could result In a fire and possible personal injury.
^
The master cylinder reservoir is on the master cylinder.
^
The reservoir is located under the hood on the left side of the vehicle.
^
The master cylinder reservoir contains enough fluid so that the reservoir does not need service under normal conditions.
^
A low fluid sensor in the master cylinder will warn of a low fluid level.
^
Clean the reservoir cap before removal in order to avoid getting dirt in the reservoir.
^
Remove the twist cap and the diaphragm.
^
Do not fill the reservoir past the maximum fill level.
^
Reinstall the cap and the diaphragm when the reservoir is full.
