Lumina V6-3.8L VIN K (1998)
7. Install the connecting rod cap.
8. Install the connecting rod cap bolts.
^
Tighten the connecting rod cap bolts to 27 Nm (20 ft. lbs.). Use the J36660 in order to rotate the connecting rod cap bolts an additional 50
degrees.
NOTICE: Refer to Fastener Notice in Service Precautions.
9. Pry the connecting rod back and forth in order to check for binding. If necessary, loosen and then retighten the connecting rod cap bolts.
10. Measure the connecting rod side clearance. Refer to Engine Specifications.
11. Install the oil pan. Refer to Oil Pan Replacement.
