Lumina V6-3.8L VIN K (1998)
3. Install the accelerator cable (5) through the slot in the accelerator pedal lever (1).
4. Seat the snap retainer in the accelerator pedal lever.
5. Check for complete throttle opening and closing positions by operating the accelerator pedal. Also check for poor carpet fit under the accelerator
pedal.
6. Install the accelerator cable to the throttle body lever.
7. Install the accelerator cable to the accelerator cable bracket.
8. Install the accelerator cable into the retaining clip.
9. Install the left instrument panel sound insulator. Refer to Instrument Panel, Gages And Warning Indicators.
10. Install the accelerator cable shield, if equipped.
11. Install the injector sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
