Lumina V6-3.8L VIN K (1998)
Fuel Tank Pressure Sensor: Service and Repair
REMOVAL PROCEDURE
1. Relieve the system fuel pressure. Refer to Fuel Pressure Release Procedure.
2. Drain fuel tank. Refer to Fuel Tank Draining Procedure.
3. Remove the fuel tank. Refer to Fuel Sender Assembly Replacement.
4. Remove the electrical connector from the fuel tank vapor pressure sensor.
5. Remove the fuel tank vapor pressure sensor (7) from modular fuel sender.
INSTALLATION PROCEDURE
1. Install the new fuel tank vapor pressure sensor (7) to modular fuel sender.
2. Install the electrical connector to fuel tank vapor pressure sensor.
3. Install the fuel tank. Refer to Fuel Tank Replacement.
4. Refill tank.
5. Install the negative battery cable.
