Lumina V6-3.8L VIN K (1998)
Transmission Speed Sensor: Service and Repair
4T60-E Automatic Transaxle
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lift Points.
2. Remove the right front tire and wheel. Refer to Wheel Removal in Wheels and Tires.
3. Remove the right engine splash shield.
4. Remove the vehicle speed sensor wiring harness connector.
5. Remove the vehicle speed sensor bolt (9).
6. Remove the vehicle speed sensor (10) from the extension case.
7. Remove the O-ring (11) from the vehicle speed sensor (10).
INSTALLATION PROCEDURE
