Lumina V6-3.8L VIN K (1998)
Retaining Ring Installation (Shaft)
1. Lubricate new drive shaft seal (11) with power steering fluid.
-
Drive shaft seal (11) into pump housing (10) with tool J 7728.
2. Pump ring dowel pins (6) into pump housing (10).
3. Thrust plate (25) and pump rotor (28) to drive shaft (7).
4. New shaft retaining ring (30) onto drive shaft (7).
5. Drive shaft subassembly into pump housing (10).
6. Vanes (27) into pump rotor (28).
Rotor Or Pump Ring Installation
7. Pump ring (26), with holes positioned correctly onto dowel pins (6), in pump housing (10).
8. Lubricate new O-ring (32) with power steering fluid.
9. O-ring (32) into groove in pump housing (10). Pressure plate (31). Pressure plate spring (33).
10. Lubricate new O-ring (35) with power steering fluid.
-
O-ring (35) into end cover (36).
12. Lubricate outer edge of end cover (36) with power steering fluid.
13. Press end cover (36) into pump housing (10).
