Lumina V6-3.8L VIN K (1998)
6. Remove the console shift control nuts.
7. Remove the console shift control.
INSTALLATION PROCEDURE
1. Install the console shift control.
2. Install the console shift control nuts.
^
Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the park/lock cable. Refer to Park Lock Cable Replacement
4. Install the automatic transaxle range selector cable. Refer to AT Range Selector Cable Replacement (At Console Shift Control).
5. Install the console shift control wiring harness.
