Lumina V6-3.8L VIN K (1998)
Shift Solenoid: Service and Repair
4T60-E Automatic Transaxle
Solenoids and Wiring Harness Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement
2. Use a small flat-bladed tool in order to remove the wiring harness (224) from the case electrical connector (35).
3. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) and/or the sensor.
4. Remove the oil pump in order to access the Torque Converter Clutch (TCC) Pulse Width Modulated (PWM) solenoid (325). Refer to Oil Pump
Replacement.
