Lumina V6-3.8L VIN K (1998)
15. Pivot the C/V joint cage (4) and the inner race 90 degrees to the center line of the outer race (1). At the same time, align the cage windows (3) with
the lands of the outer race (2).
16. Lift out the cage (4) and the inner race.
17. Remove the inner race (1) from the cage (2) by rotating the inner race (1) upward.
18. Clean the inner and outer race assemblies, the C/V joint cage and the chrome alloy balls thoroughly with cleaning solvent. remove all traces of old
grease and any contaminates.
19. Dry all the parts.
20. Check the C/V joint assembly for unusual wear, cracks, or other damage.
21. Replace any damaged parts.
22. Clean the axle shaft. Use a wire brush to remove any rust in the seal mounting area (grooves).
