Lumina V6-3.8L VIN K (1998)
4. Install the vehicle speed sensor wiring harness connector.
5. Install the right engine splash shield.
6. Install the right front tire and wheel. Refer to Wheel Installation in Wheels and Tires.
7. Lower the vehicle.
Input Speed Sensor Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the input speed sensor clip (441) from the case cover.
4. Remove the input speed sensor (440) from the case cover.
5. Inspect the input speed sensor (440) for the following conditions:
^
Damaged or missing magnet
^
Damaged housing
^
Bent or missing electrical terminals
