chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Window Switch > < Armrest Pull Cup|Page 11122
Page 16
background image

1. Install the rear side door regulator (5).
2. Connect the electrical connector, if equipped.
3. Install the rivets (2).

NOTE:  Refer to Fastener Notice in Service Precautions.

4. Install the door window regulator bolts (1).

Tighten

Regulator bolts to 10 Nm (89 lb in).

5. Install the rear side door window.

Door Window Regulator Motor

DOOR WINDOW REGULATOR MOTOR

Coupe and Sedan

CAUTION:  Do not attempt to service the regulator motor separately. The regulator lift arm is under tension from the counterbalance spring
and can cause personal injury if the motor is removed from the regulator.

The door window regulator motor cannot be serviced separately. Refer to "Window Regulator".

Power Window Switch > < Armrest Pull Cup|Page 11122