Lumina V6-3100 3.1L VIN M SFI (1995)
a. Remove Air Cleaner and duct assembly.
b. Put transaxle in "NEUTRAL."
c. Remove torque strut-to-engine bracket bolts and swing torque struts inside.
d. Install J 41131 and rotate engine assembly forward.
NOTICE: Pull on spark plug boot or heat shield only, twisting a half turn to release seal while removing. DO NOT pull on wire or spark plug lead may
be damaged.
4. Spark plug wires.
^
Do Note position of wires BEFORE removing.
INSTALL OR CONNECT
1. Spark plug wires.
^
To proper location noted when removed.
2. Return engine to proper position:
a. Rotate engine assembly backward and remove J 41131.
b. Install torque strut-to-engine bracket bolts.
c. Put transaxle assembly in "PARK."
d. Install Air cleaner and duct assembly.
3. Spark plug wire retaining clips to engine.