Lumina V6-3100 3.1L VIN M SFI (1995)
Power Window Switch: Service and Repair
Sedan
Power Window Switch Assembly
NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the "OFF" position. This will eliminate the possibility of
shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.
Remove or Disconnect
1. Pull cup.
2. Electrical connector.
3. Switch from pull cup.
Install or Connect
1. Switch tabs into pull cup slots and snap in to secure.
2. Electrical connector.
3. Pull cup.