Chevrolet Workshop Service and Repair Manuals

Door Speaker

Remove or Disconnect

1. Trim panel.
2. Screws.
3. Electrical connector.
4. Electrical connector clips from speaker housing.
5. Housing from door inner panel.
6. Screws.
7. Speaker from housing.

Install or Connect

1. Position speaker to housing.
2. Screws.

Tighten
^

Screws to 2 N.m (18 lb. in.).

3. Electrical connector clip to speaker housing.
4. Electrical connector.
5. Screws.

Tighten
^

Screws to 2 N.m (18 lb. in.).

6. Trim panel.

Energy Absorber Pad

COUPE