chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Window Seal:|531009 > < Windows - Stick in the Full Up Position|Page 10887
Page 1
background image

Window Seal: All Technical Service Bulletins
Front Door Area - High Pitch Whistle Sound

File In Section: 10 - Body 

Bulletin No.: 53-10-14

Date: April, 1995

Subject:
High Pitch Whistle Sound Around Front Doors (Apply Sealer)

Model:
1995 Chevrolet Lumina Sedan

CONDITION
Some customers may comment that a whistle sound is heard at speeds of 30 mph and above.

CORRECTION
Fill front cavity of outer belt seal with silicone sealer.

PROCEDURE

1.

With glass in full down position, remove rear outer belt retaining screw and remove molding by pulling upward.

2.

Lube the flange that the outer belt molding is mounted on from the mirror back 6" with silicone lube. Coating the flange with silicone lubricant
will allow molding removal at a later date without damage.

3.

Remove plastic end cap from molding. See Illustration, Item 2.

4.

Fill cavity 2/3 full and 4" back from the front of the molding using silicone sealer. See Illustration, Item 1.

5.

Reinstall plastic end cap to the molding.

6.

Install molding to the door and reinstall retaining screw.

WARRANTY INFORMATION

For vehicles repaired under warranty.

All Technical Service Bulletins for Window Seal:|531009 > < Windows - Stick in the Full Up Position|Page 10887