Lumina APV V6-191 3.1L (1990)
18.
Remove the rivet from the lock cylinder retainer, on vehicles with power lock. Remove retainer and cylinder (discard cylinder).
19.
Recode the lock cylinder supplied in kit and reinstall.
20.
Reinstall lock cylinder retainer plate. Using a long nose rivet gun, install a 1/8" X 1/4" aluminum rivet to the lock cylinder bracket. (On Vehicles
Equipped With Power Locks.)
21.
Reinstall cover plate and lock rods.
22.
Check for proper operation of the lock and lift gate before the next step.
23.
Reinstall trim panel.
24.
Reinstall D-pillar trim.
25.
Reinstall shoulder belt anchor bolts and torque to 35-48 N.m (26-35 lbs.ft.)
26.
Reinstall speaker cover
Part Availability:
Parts are expected to be available on June 8, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only
verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation
at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.
Labor Operation Number:
T1838
Labor Time Allowance:
2.5 Hrs.
