Lumina APV V6-191 3.1L (1990)
13.
Install template from the kit to the right hand side of the trim panel, as shown in Figure 3.
Important:
Template will have to be folded in opposite direction for left hand side.
14.
Mark area around template with grease pencil.
15.
Remove outlined section of trim panel with suitable tool such as a coping saw, die grinder, etc. After cutting, use a flat file to smooth out flat lines
and rat tail file to smooth out radius lines.
16.
Install new lock cylinder which has a larger gripping area for opening the lift gate as follows:
17.
Remove lock rods and lock rod cover plate.
