Lumina APV V6-191 3.1L (1990)
Exhaust Manifold: Service and Repair
LEFT
1.
Disconnect negative battery cable.
2.
Remove serpentine belt, then A/C compressor.
3.
Remove engine strut, then engine strut bracket.
4.
Disconnect crossover pipe, then remove manifold.
5.
Reverse procedure to install, tighten manifold bolts to specifications.
RIGHT
1.
Disconnect negative battery cable, then oxygen sensor wire.
2.
Disconnect crossover pipe, then raise and support vehicle.
3.
Remove exhaust pipe and support frame at rear center.
4.
Remove frame mount bolts and lower frame 8-10 inches. Remove manifold.
5.
Reverse procedure to install, tighten manifold bolts to specifications.