Lumina APV V6-191 3.1L (1990)
Fig. 8 Valve Body Bolt Location
9. Remaining bolts securing valve body to case cover and valve body. Do not lose the six check balls. Do not remove bolt "A".
10. Bolt "A" and separate auxiliary valve body from valve body.
INSTALL OR CONNECT
1. Auxiliary valve body to valve body with bolt "A".
2. Check balls in valve body.
IMPORTANT:
^
Hold check balls in valve body with Transjel transmission assembly lubricant, part no. J36850. DO NOT USE PETROLEUM JELLY.
3. Valve body to case cover.
4. T.V. bracket and linkage.
5. TCC wires and wiring connectors.
6. TCC solenoid.
7. Valve body cover with a new gasket.
8. Left front wheel and tire assembly.
9. Lower vehicle.
10. T.V. cable and screw.
11. Negative battery cable.
ADJUST
^
T.V. cable.
^
Fluid level.
Valve Body Cover
VALVE BODY COVER 3T40
