Lumina APV V6-191 3.1L (1990)
This bulletin is notice to you that the new motor vehicles included in this campaign may not comply with the standard identified above. Under Section
108 of the National Traffic and Motor Vehicle Safety Act, it is illegal for a dealer to sell a new motor vehicle which the dealer knows does not comply
with an applicable Federal Motor Vehicle Safety Standard. As a consequence, if you sell any of these motor vehicles without first performing the
campaign correction, your dealership may be subject to a civil penalty up to $1,000 for each such sale.
PARTS INFORMATION
Parts required to complete this campaign will be shipped directly to involved dealers. Parts are identified by VIN and will be shipped on a NO CHARGE
basis.
Quantity/
Part Number
Description
Vehicle
NPN
Modular Seat Rear Hook
1
repair Kit (5 seats per kit)
Service Procedure
(Figure 1)
1.
Remove seat, place on a clean surface (Figure 1). Position seat on side for better access.
NOTE:
IT IS NECESSARY TO COMPLETE NEW LATCH REPLACEMENT COMPLETELY ON ONE SIDE OF THE SEAT
BEFORE PROCEEDING TO THE OPPOSITE SIDE DUE TO RIGHTHAND AND LEFTHAND SPRINGS. REPAIR
PROCEDURES ARE IDENTICAL FOR ALL REAR MODULAR SEATS.
(Figure 2)
2.
Remove rear hook pivot rivet by the following procedure (Figure 2). (Note position of latch spring):