chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Heated Glass Element|Testing and Inspection > < Diagram Information and Instructions|Page 7361
Page 1
background image

Heated Glass Element: Description and Operation

CIRCUIT OPERATION

When the Ignition Switch is turned to "RUN," voltage is applied through the IGN Fuse to the Heater and A/C Control Assembly and the Rear
Window Defogger Relay. When the Rear Window Defog Switch is pressed, voltage is momentarily applied to the Rear Window Defogger Relay
through CKT 292. When voltage is applied to the Rear Window Defogger Relay, the Rear Window Defogger Relay will close the internal contacts.
The internal contacts remain closed until the defog cycle is complete or Rear Window DEFOG Switch is pressed a second time.

When the internal contacts of the Rear Window Defogger Relay are closed, voltage is applied to the Rear Window Defogger Grid and Indicator.

The Rear Window Defogger Relay contains an internal timer to control the time the internal contacts are closed. When the Ignition Switch is turned
to "RUN" and the Rear Window Defogger Switch pressed for the first time, the defog cycle lasts 10 minutes and further operation will result in 5
minutes defog cycles. The defog cycle is reset to 10 minutes when the Ignition Switch is turned to "OFF" and back to "RUN."

Heated Glass Element|Testing and Inspection > < Diagram Information and Instructions|Page 7361