Malibu L4-144 2.4L DOHC VIN T SFI (1998)
17. Install the Transmission to the engine brace.
18. Install the Transmission to the engine brace bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
19. Install the Transmission selector cable. Refer to Transmission.
20. Install the torque converter to the flywheel bolts.
21. Install the starter motor assembly to the engine. Refer to Starter Motor Replacement in Starting and Charging.
22. Install the Engine/Transmission assembly. Refer to Engine Assembly Replacement in Transmission.
23. Refill all fluid levels to specification.
