Malibu L4-144 2.4L DOHC VIN T SFI (1998)
1. Remove air line adapter.
2. Install the spark plug.
NOTICE: Carefully roll the camshaft housing right side up as it is installed onto the cylinder head. The lifters can be damaged if they fall out and
hit a hard surface.
3. Install the camshaft housing.
4. Install the camshaft housing gasket.
5. Apply Pipe Sealant GM P/N 1052080 or equivalent to the camshaft housing retaining bolt threads.
6. Install the camshaft housing bolts.
7. Using the J 36660, install the bolts in sequence.
^
Tighten the bolts to 15 Nm (11 ft. lbs.) + 90°.
NOTICE: Refer to Fastener Notice in Service Precautions.
8. Install the timing chain housing and the timing chain. Refer to Timing Chain Housing Replacement
9. Uncover the fuel injectors.
10. Install new injector O-ring seals. Lubricate the O-ring seals with engine oil.
11. Uncover the injector openings in the cylinder head and install the fuel rail onto the cylinder head.
