Malibu L4-2.2L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
1. Remove the air cleaner outlet duct assembly.
2. Disconnect the evaporative emission (EVAP) canister valve purge tube quick connect fitting at the intake manifold.
3. Disconnect the EVAP canister valve purge tube quick connect fitting at the EVAP canister purge solenoid valve.
4. Remove the EVAP canister valve purge tube.
Installation Procedure
1. Install the EVAP canister valve purge tube.
2. Connect the EVAP canister valve purge tube quick connect fitting at the EVAP canister purge solenoid valve.