Malibu L4-2.2L VIN F (2005)
2. Install the O2S.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the O2S to 30 N.m (22 lb ft).
3. Connect the O2S harness connector.
4. Install the exhaust manifold heat shield.
2. Install the O2S.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the O2S to 30 N.m (22 lb ft).
3. Connect the O2S harness connector.
4. Install the exhaust manifold heat shield.