chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployment Procedures|Page 10740 > < Deployment Procedures|Page 10738
Page 2
background image

3. Install the wire harness connector to the inflatable restraint I/P module.
4. Install the I/P trim pad.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in Restraint Systems.
6. Deploy the old module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required

retention period. Refer to Pretensioner Handling and Scrapping.

Deployment Procedures|Page 10740 > < Deployment Procedures|Page 10738