chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Transmission Mount Inspection|Page 8209 > < Transmission Mount Inspection|Page 8207
Page 1
background image

Transmission Mount: Service and Repair
Transmission Mount Replacement - Rear

  

Transmission Mount Replacement - Rear 

Removal Procedure 

1. Raise and support the vehicle.  
2. Remove the left tire and wheel. 
3. Using a suitable jack stand, support the rear of the powertrain.

4. Remove the transmission mount to bracket through bolt and nut.

5. Remove the transmission mount to transmission bolts.
6. Disconnect the HO2 sensor Harness from the transmission mount bracket.

Transmission Mount Inspection|Page 8209 > < Transmission Mount Inspection|Page 8207